Certified Server Hardware
| Quantity | Description | Part # |
|---|---|---|
| HP DL-360 G5 | ||
| This is the default configuration as shipped by N-able Technologies | ||
| 1 | DL- 360 Base G5 with Intel Xeon 53xx Processor and 2GB RAM | 457925-001 |
| 2 | 72GB Hot Swap 2.5" 10K SAS Hard Disk Drive | 375861-B21 |
| 1 | 4 GB Memory Kit | 397413-B21 |
| 1 | HP DVD-ROM 8X IDE Internal 5.25" Drive | 264007-B21 |
| 1 | Battery Backed Write Cache Enabler Option Kit | 383280-B21 |
| 1 | HP PCI-X Riser Kit | 405154-B21 |
| 1 | US Robotics Performance Pro modem | USR5610C |
| Dell 2950II/III | ||
| 1 | Dell 2950 | |
| 1 | 4GB required, 6GB recommended for configurations exceeding 500 nodes | |
| 2 | 73 GB 10K RPM SAS Hard Disk Drive | |
| 1 | PERC 5/i, Integrated Controller Card, with cable for 3.5X6 backplane, 2950 Customer Install (310-8672) Please Note: The RAID card specified does not ship by default with the system. This must be ordered seperately and installed manually |
310-8672 |
| 1 | CD-ROM Drive | |
| 1 | US Robotics Performance Pro modem | USR5610C |
| Intel Server System SR2500ALLXR | ||
| 1 | SR2500 Chassis with S5000PALR and Active Backplane | SR2500ALLXR |
| 1 | Required: Intel Xeon 51xx or Better Recommended: 53xx or 54xx processor for optimal scalability |
See Supported CPU List |
| 1 | 72GB Required, 142 Recommended for Larger Installations | See Tested Hard Drive List |
| 1 | 4GB Required, 6 GB recommended for configurations exceeding 500 devices | See Tested Memory List |
| 1 | Intel DVD/CDRW | AXXDVDCDR |
| 1 | 512MB 667MHz Reg ECC DDR2 RAID Cache | AXXMINIDIMM512 |
| 1 | Intel RAID Controller Battery Backup Unit | AXXRSBBU3 |
| 1 | Intel RAID Controller Activation Key | AXXRAK18E |
| 1 | Optional: Redundant Power Supply | ASR2500PS |
| 1 | Optional: Rack Mounting Rail Kit | AXXBASRAIL13 |
| IBM x3550 | ||
| 1 | IBM x3550, configured with 1 Xeon 51xx or better processor and 3.5" disks | 7978-xxx |
| 1 | IBM ServeRAID-8k SAS Controller | 25R8064 |
| 1 | PCI-X Riser Card | 32R2816 |
| Memory | 4GB required, 6GB recommended for configurations exceeding 500 nodes | |
| 1GB (2x512MB) PC2-5300 CL5 ECC DDR2 Chipkill FBDIMM 667MHz | 39M5782 | |
| 2GB (2x1GB) PC2-5300 CL5 ECC DDR2 Chipkill FBDIMM 667MHz | 39M5785 | |
| 4GB (2x2GB) PC2-5300 CL5 ECC DDR2 Chipkill FBDIMM 667MHz | 39M5791 | |
| 8GB (2x4GB) PC2-5300 CL5 ECC DDR2 Chipkill FBDIMM 667MHz | 39M5797 | |
| Hard Disks | N-central requires a minimum of 2x 73GB | |
| 73GB 15K 3.5" Hot-Swap SAS | 40K1043 | |
| 146GB 15K 3.5" Hot-Swap SAS | 40K1044 | |
| Optional | ||
| 1 | Redundant Power Supply Kit (optional) | 32R2815 |
| 1 | US Robotics Performance Pro modem | USR5610C |
| 1 | IBM Remote Supervisor Adapter | 39Y9566 |
Notes
- Processor model numbers and clock speeds are for the recommended configuration. Equivalent or faster Xeon processor models may be substituted for performance or price reasons.
- Memory configurations listed are recommended. 4 GB is the minimum required for a new installation of N-central. More may be used to provide additional scalability.
- If paging or SMS notifications are to be used, the US Robotics Modem (USR5610C) must be installed.
Self-Service Portal
